![]() ![]() When you specify that you want information about a specific network displayed, more detailed statistics are shown. Specifies the interface through which the specified network can be reached. Specifies the last time the route was updated in hours:minutes:seconds. Specifies the address of the next router to the remote network. The first number in the brackets is the administrative distance of the information source the second number is the metric for the route. Indicates the address of the remote network. However, it does not indicate what path will be used next when forwarding a non-fast-switched packet, except when the paths are equal cost. It pertains only to the non-fast-switched packets. *-Indicates the last path used when a packet was forwarded.Indicates protocol that derived the route. Table 68: Show IP Route Field Descriptions (Continued) Field Table 68 describes significant fields shown in these two displays. The following is sample output that includes some IS-IS Level 2 routes learned: The following is sample output from the show ip route command when entered without an address: The process-id argument first appeared in IOS Release 10.3. The longer-prefixes keyword first appeared in IOS Release 11.0. This command first appeared in Cisco IOS Release 10.0. (Optional) Number used to identify a process of the specified protocol. If you specify a routing protocol, use one of the following keywords: bgp, egp, eigrp, hello, igrp, isis, ospf, or rip. (Optional) Name of a routing protocol or the keyword connected, static, or summary. (Optional) The address and mask pair becomes a prefix and any routes that match that prefix are displayed. (Optional) Address about which routing information should be displayed. Use the show ip route EXEC command to display the current state of the routing table. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
March 2023
Categories |